Creating a real tile mosaic on almost any surface top is easy. The first step would be to look in a tile shop and see what is available. Then decide on a pattern you want. After deciding a pattern or design, sketch your pattern on the surface you are going to tile over.
Mosaic Countertop Tips
The first step is to prepare the surface making sure the tile will adhere. You do this by scoring the surface with a utility knife then coating the surface with a mixture of watered down white glue.
Next you take tile cement, commonly known as thin set or mortar, and spread a thin coating over the surface. Place your tiles in the cement according to the pattern you drew. After the cement has set, (don’t be in too big of a hurry) fill the gaps between the tiles with tile grout. Most people think grout is available only in white but if you look in a hardware store you’ll find many different colors of grout available. You apply the grout by simply troweling it over all of the seams between the individual tiles. Then wipe away the excess with a sponge.
Have you ever been in a cafe, restaurant or a friend’s house for that fact, and admired the mosaic tile on the tabletops or walls? Well, it’s not that hard to bring that look into your own home. Where’s a good place to add a mosaic in your home? Kitchens and bathrooms are the obvious choices but end tables and patios have become favorites too.
Consider embellishing a coffee table purchased from an unfinished furniture store. This is a great little week-end project. All you have to do is add a coat of paint and then make a small mosaic on the tabletop using some different size tiles or even broken tile pieces. This same technique works equally well for a larger area like this as it does for a small accent table.
Before starting this project, there are some things you should do first to be prepared.
Take some time researching what you want to do before you start laying tiles down. There are tons of books on ceramic tiles at your bookstore or library. A recommendation is to just thumb through them to get some inspiration for your design. Once you have a basic idea of what you want to do, it’s always a good idea to draw a sketch of your design.
Then you will want to place the actual tiles on the countertop, starting from the center and working outwards, to make sure your pleased with your design. Once you have everything in place, take a magic marker and mark the tiles’ location.
Before you cement the tiles in place, you have to prepare the tiles for the mosaic sections. How do you do that? This is where you can get some aggression out. Take a mix of tiles, wrap them in a towel and give them a whack. This is the simplest way to get the broken pieces of tile you’ll need for the mosaic. For the border mosaics you are going to need some smaller pieces of tile. For the smaller pieces you use a tile nibbler to break off pieces the size you need.
To cement the tiles in place, use mortar that you can buy at any tile store or home improvement store. You just trowel the mortar on about 1/8th inch thick. Then use the edge of the trowel to score the mortar. Then just put your tiles in place. For the mosaic sections you use the same process. Take the different pieces of tile and arrange them however you like. Try and keep the spaces between the tiles to 1/8th of an inch.
How do you finish the project? You have to grout the tiles after the mortar has set up or dried. Remember, tile grout is available in many colors, not just white. Next smear the grout over the top of the tiles filling in the seams. To clean the tiles, wipe off any excess grout with a sponge. Let it dry overnight and you’re done so sit back and admire your work of art!
Woodworking plans are an essential component of any project. Wood working patterns and scroll saw patterns are needed to plan a project and create accents in your piece. Good plans give step by step instructions, diagrams and illustrations to guide you through from start to finish. You can buy plans, find them for free on the internet or make your own plan.
Finding Woodworking Plans
Free woodworking patterns can be found on the internet. Many are free, but others need to be purchased. You can search for general plans or for specific projects. Patterns are available for everything from a simple box or bird feeder to elaborate furniture projects. Several websites offer plans for making children’s toys and decorative items. Enter the project you are looking for in your favorite search engine or just enter free woodworking plans.
There are books available that are devoted to wood working patterns. You can find these at book stores, on the internet or in your local library. Often, woodworking magazines will contain plans for a wide variety of projects. Purchase a few of these at your local news stand. After you have found one you like best, you may decide to subscribe and receive new plans month after month.
If you are new to woodworking, it’s best to start of with a simple pattern. This will help you learn to read and follow the plans. As your skills increase, you can move on to more difficult projects. Start off with a simple toy or bird feeder before attempting to make a dining room set. Look for detailed and thorough plans to help you create your project.
Good plans include detailed instructions. The instructions should take you step by step through the entire project. Look for plans that have detailed diagrams as well as illustrations of the project at each stage. Print out your plans and keep them in a binder. This will help keep you organized and prevent pages from getting lost or damaged.
You can follow the plan step by step or you may decide to make a few changes to the plan. Changing a few details is a great way to make a generic plan more personal and original. For example, you can change certain designs or accent pieces and give the project a whole new look. Another option is to paint the finished product, rather than staining.
Creating Woodworking Plans
Once you become more experienced, you may decide to try to create your own plan. Start by sketching how you want the finished product to look. The first sketch doesn’t need to be too technical or detailed. You will add the details and dimensions later. Once you have made your original sketch, determine the dimensions of the total finished product.
Determine what type of wood you will use in your project and how much wood you will need. It’s important to use accurate measurements when ordering the wood to avoid running out before the project is finished. Determine what other materials you will need to complete the project. This will help you estimate the total cost.
Create a detailed list of all materials needed and the quantity of each material. Include items such as paint, stain or polyurethane. Consider the tools that will be needed to complete the project. Do you have all that you need? With this information, you can then determine the overall cost. Take this list with you when you go out to purchase supplies.
You will then draw a more detailed sketch of your design. Create diagrams like those found in woodworking plans on the internet. Draw each stage of the process in detail. Write out detailed instructions that will take you step by step through the project. This will help you stay organized and ensure that you don’t skip any essential steps along the way.
Home improvement jobs are something that is near and dear to me. I love doing things to fix up my house. More importantly, I love the satisfaction I get when I am able to make the improvement by myself. One of the easiest home improvements that you can do yourself is to paint!
Almost anyone can be successful painting a room. You just need the right tools for the job. If you don’t have the right tools, painting a room can be much more difficult. Carefully select your paintbrushes, your brand of paint, and your paint finish. Make sure the brushes and paints that you have chosen are the right ones for the job at hand.
For example, if you are painting with a very inexpensive latex paint, you may discover that you have to put four coats of paint on the wall instead of two. If you are using a cheap brush and roller, you will probably find little chunks of roller, and individual bristles that have fallen out of your brush stuck to your wall as well.
How do I know this? Well, when I first started painting, I didn’t know that better tools made for an easier job. I picked quite a few bristles out of drying paint, as well as little chunks of fuzz that continually shed off the roller. I don’t know about you, but I don’t particularly like fuzzy, chunky walls.
Paints have several finishes such as flat, eggshell, satin, semi gloss, or gloss. Each of these types of paint has its own purpose. If you are painting a kitchen or a bathroom, you should probably select a semi gloss or gloss style paint. Each of these styles of paint can withstand a higher moisture content in the air.
When I take a shower, the mirrors tend to fog up in the bathroom. The condensation that you see on the mirror is not only on the mirror – it is also on all of the walls in the bathroom as well. Considering that, a semi gloss or a gloss style paint is a must-have in my bathroom and probably in yours too. Water does not easily penetrate a semi gloss or gloss finish. If you have a flat finish paint in a room that has high humidity, you may find yourself painting again before too long.
Another place that you should consider using a semi gloss or gloss is in a room that is used by children. Children tend to touch the walls much more often than adults do. Semi gloss and gloss painted surfaces are very easy to clean. You can usually remove marks from this type of wall with a simple cloth and your average household cleaner. This can be a real time-saver if you have small children.
Flat paint finishes are often used in living rooms, and formal dining rooms. Flat paint does not have any reflection or shine, hence the name “flat”, and are usually reserved for the more formal areas of your home. Flat paint is not easy to clean and tends to show the slightest mark, touch, or rub. A better, or higher quality brand of paint will clean more easily than a cheaper brand of paint.
Painting is an easy way to really freshen up your home. As I said in the beginning, I love to paint and I get a lot of pleasure from the big change that paint can bring to a room. I also love all of the complements that I seem to get after I make a room over with paint. Try it for yourself – I think painting is the easiest home improvement that anyone can do by themselves!
When it comes to applying paint to your walls there are many things to get your walls looking their best. The following article will discuss how to make your walls look their best the next time you paint. Continue reading for expert tips to get your walls ready for a new coat of paint.
Remove All Nails From Your Walls
Before beginning any painting project, you need to get your walls ready for the paint. The first step in wall preparation is to remove all photographs and shelves from your walls. Then, you will need to remove all the nails from your walls. Removing the nails will ensure that you can quickly and effortlessly roll the primer and paint onto your walls.
Cover Any Holes
Once all the nails are removed, it is time to begin filling the nail holes. This can be accomplished with a bucket of joint compound and a putty knife. To fill the holes simply get a small amount of joint compound on your putty knife and press into the hole. Then, take your putty knife and gently scrape over the area to remove the excess joint compound. Allow to dry completely. Then, gently remove any excess joint compound from the wall using a damp rag.
All traces of oil should be removed from your walls before painting. To ensure that your walls are ready for paint, wash your walls using a degreaser. After you have washed your walls, rinse them well and allow to dry completely before beginning to paint.
Priming your walls with a good primer is the first line of defense for beautiful walls. For best results, apply at least two coats of primer to your walls before painting. Each coat of primer should be allowed to dry for a minimum of 4 hours before applying the next coat. Additionally, lightly sanding your walls after each coat of primer will help ensure your walls are perfectly smooth.
It is now time to begin gathering your painting supplies. You will need several old rags to clean up any spills. Also, get a variety of brushes. These brushes should include a 4 inch wide brush to help trim out along the baseboards and ceilings. You will also need an angled brush to trim out around windows and door frames. Next, you will need a high quality roller along with a paint tray. Many people also prefer to have a pouring spout for the top of their paint can. A spout allows you to pour the paint without accidentally spilling any. Finally, you will need either a painter’s tarp or an old sheet to protect your floors from any drips.
After you have done the aforementioned steps and gathered your painting supplies, you are ready to begin painting your walls. Invite a few friends over and crank up the radio to help your painting day go by quickly. You will be rewarded with freshly painted walls and a beautiful interior.
Everybody is on a budget which often means that we cut corners just to save a buck or two. More often than not these shortcuts can end up costing us much more than it was worth to begin with and nowhere is this more true than in the home improvement industry.
Builders, plumbers, electricians and other household industries have developed a very bad reputation over the years for delivering less than the best service. However, I don’t believe that all of them are entirely to blame and that homeowners often turn on these tradesmen as a result of their own frugality.
My Grandfather always used to say “If you buy cheap, you get cheap.” This does not necessarily mean that you need to opt for the most expensive home improvement products and services. Neither does it mean that you will be getting the best when you pay the most.
There is a happy medium where you will find fair quotations for good reliable labor as well as the products you need for your home improvement. There are also ways in which you can take control of your home improvement needs to make sure it is done right the first time.
Word of mouth is still the best way to market a good product so make sure that you choose household products that are well known and have a good reputation in the industry. Be sure to ask any tradesmen for any references they may have and check on those references to ensure that they are fair.
Be sure to check up on those references in person. In other words show up at jobs previously listed by the tradesmen, checkout the quality of their work and ask questions such as whether the project was completed on time and whether the relevant tradesman was professional and courteous in his or her dealings.
If you can’t find reliable references take a walk around your neighborhood and find properties that have recently been renovated and look in good shape. Pop a note into the postbox and ask if the homeowner would be willing to contact you with the name and contact information for their contractor. You will be surprised how often people are willing to forward details of a job well done.
Don’t just accept the first quote that you are given. Compare at least three quotes and make sure to take into account any guarantees for products and labor as well as value added services that may be included in the quote. For example, if you are buying carpeting find out if the installation is included in the quote.
Last but by no means least, don’t attempt any home improvements yourself if you don’t know what you are doing. This is especially important for the plumbing and electrical in your home but can have just as many disastrous consequences for a building project.
Take control of your own home improvement and make sure that everything is done right the first time.